Learn how to change a lightbulb
Light fitting, Light Bulb
Scouts Must change a light bulb by following the following instructions:
1. Turn off the power
First make sure the power is turned off. The safest way to do this is to switch the large red power button to 'off' on the fuse box.
2. Let it cool
Allow the bulb to cool before touching it.
3. Use a ladder
Ensure you can safely reach the bulb by using a stepladder.
4. Remove bulb
Take the bulb out of the socket. The way you do this will depend on whether your bulb has a bayonet mount or a screw fitting:
a) Bayonet Mount (two prongs, standard in the UK):
Grasp the bulb lightly but firmly, push upwards gently and turn anticlockwise until it is released from the socket.
b)Screw Fitting (most common in Europe):
Keep gently twisting anticlockwise until the bulb comes loose from the socket.
5. Replace the bulb
Insert a replacement bulb lightly but firmly into the socket. Depending on the type, turn it clockwise until it locks into place or keep gently twisting clockwise until it won't go any further.
6. Restore power
Once the bulb is in, turn the power back on again and switch on the light.
7. Dispose old bulb
The old bulb needs to be disposed of safely as the glass is fragile and very sharp. Use the packaging from the new bulb to wrap the old one for safe disposal.
Scouts Should also be thinking about safety:
As always, safety is crucial when working with electrical or wiring faults. Remember:
Check the wattage on the used bulb and replace it with a bulb of the same wattage
Dispose of the bulb well out of the reach of children
Don't put your fingers in the exposed light socket